Die Entstehung von diesem einzigartigen Produkt begann in den 50iger Jahren des 20. Jahrhunderts in Deutschland.
Nach dem Krieg begann die aktive Erholung bei begrenzten Ressourcen und Möglichkeiten. Die schwierige wirtschaftliche Lage war der Anstoß für eine Reihe von Erfindungen und wissenschaftlichen Entdeckungen, die bis zum 21. Jahrhundert perfektioniert wurden.
Im Jahr 1957 bis 1961 wurde im Rahmen eines Forschungsprojektes mit einem Budget von ca. 3 Millionen D-Mark, im Bereich der Säure Batterien geforscht. Die starke Nachfrage der Blei Säure Batterien führte dazu, hier neue wissenschaftliche Erkenntnisse zu erlangen.
Nach einer vierjährigen Laborarbeit stellte sich ein erster Erfolg ein, als eines Tages, rein zufällig, ein langersehntes, sehr positives Ergebnis sichtbar wurde.
Es handelte sich hier um eine Verbesserungen der chemischen Formel für die Säurelösung in den Bleibatterien, deren Leistungsfähigkeit und Lebensdauer erheblich verbessert werden konnte. E-LYT wurde entwickelt.
Nach längerer Zeit im praktischen Tests, bestätigten die Experimente die Theorie.
Eine kleine Sensation, die jedoch von den Herstellern der Batterien angezweifelt wurde. Der Umsatz war in Gefahr.
Offiziell gibt es bis heute keine eindeutige Akzeptanz der Batteriehersteller, doch die Ergebnisse sprechen für sich.
01 | Nombre de empresa: | E-LYT |
02 | Composición: | Mezcla de compuestos de cadmio disuelto en agua y sales metálicas. |
03 | Designación: | Conexión de cadmio CAS-No. 10124-36-4 |
04 | Peligros: | Nocivo por ingestión, inhalación o contacto con la piel. |
05 | De almacenamiento: | Almacenar en un lugar seco. Bajo llave y conservar su. |
06 | Disposición: | Eliminar el contenido / el recipiente de conformidad con las ordenanzas locales / Regulaciones Internacionales / regionales / nacionales. |
07 | Formar: | líquido |
08 | Color: | transparente |
09 | Olor: | débil |
10 | PH a 20 ° C: | 03.03 a 03.04 |
11 | Punto de fusión: | inaplicable |
12 | Punto de ebullición: | ca. 96°C |
13 | Temperatura de ignición: | inaplicable |
14 | Punto de inflamación: | inaplicable |
15 | Densidad a 20 ° C: | 1,18 |
Seguridad a la solicitud
Die Wirksamkeit von E-LYT wurde durch eine Anzahl voneinander unabhängiger
wissenschaftlicher Gutachten nachgewiesen. Die entsprechenden Institute sind
nachfolgend aufgelistet.
Übereinstimmend wurde nachgewiesen:
E-LYT verhindert weitgehend eine Sulfatierung und damit eine vorzeitige
Leistungsreduzierung.
In der Konsequenz verlängert E-LYT signifikant die Gesamt-Lebensdauer von Batterien.
E-LYT beugt wirksam einer Erhöhung des Innenwiderstandes vor und erhält das Gewebe dauerhaft mikroporös.
BAM (Bundesanstalt für Materialprüfung)
Proffesor Dr. Klaus Bätjer Universität Bremen
Feusser KG für Anlagen der Meßtechnik und Regeltechnik Hannover
Umweltgutachten UBD Institut für Umwelt-Boden-Deponie-Analytik Hamburg
TÜV Rheinisch – Westfälischer Technischer Überwachung-Verein e.V.
Laboratorium für elektrische Messungen
Institut für Produktforschung und Information Stuttgart
Diplom Ing. Dr. tech. W.J. Harer Institut für chemische Technologie Universität Graz
Diplom Ing. Fritz Jarosch Konsulent / Brunn am Gebirge NÖ
Tokio Elektrolaboratorien Direktor Kenzo Ozani
SINTEF Gesellschaft für industrielle und technische Forschung an der Technischen Hochschule Norwegens Trondheim
The problem
The premature dead of the lead sulfuric acid batteries is caused by formations of sulfate crystals and by oxidation. This costs money and is moreover harmful to the environment.
Our solution
The additive E-LYT prevents formation of sulfate crystallization in new batteries and also oxidation of the lead plates from the beginning.
E-LYT prolongs the service life of the battery and additionally preserves the power capacity.
In case of used batteries E-LYT produces a micro porous, plastic and solid surface by decomposition of the hard, crystallized layer.
E-LYT
serves for extending the service life of lead sulfuric acid batteries of any kind (traction, stationary and starter batteries).
E-LYT
reduces permanently and remarkably investments for new batteries.
E-LYT
regenerated batteries require less energy supply for the charging process.
E-LYT
is an active contribution to protecting the environment.
E-LYT
is guaranteed harmless for all lead sulfuric acid batteries.
Se trata de cómo funciona la E-LYT
In order to prevent misunderstandings:
E-LYT is no dope for pushing the power output for a short time by increasing the acid density with following rapid decrease in power.
Our product is an additive, which does not increase the acid density in the battery and is yet unable to perform such an increase at a pH-value of 3.5.
E-LYT provides a long term regeneration effect at simultaneously high power output.
We are of course not liable for the battery quality, since we are not producing them.
The efficiency of E-LYT has been scientifically certified by state expert opinions and TÜV (German Technical Control Board)
· Prolonged service life by up to 100% with new battery
· For a used battery In good working order, depending on age and condition a 100% extension of the yet to be expected service life can be expected.
Herewith we guarantee that E-LYT will fight sulfate crystals in any lead sulfuric acid battery and protect the lead substance against oxidation.
If E-LYT is filled into a new battery it will prevent oxidation and sulfate crystallization from the beginning; if filled into a used battery it will release sulfate crystals micro porously.
The positive long term effect of E-LYT on performance and service life of lead sulfuric acid batteries has been scientifically certified by state expert opinions and TÜV (German Technical Control Board).
In order to prevent misunderstandings:
E-LYT is no dope for pushing the power output for a short time by increasing the acid density with following rapid decrease in power.
Our product is an additive, which does not increase the acid density in the battery and is yet unable to perform such an increase at a pH-value of 3.5.
E-LYT provides a long term regeneration effect at simultaneously high power output. We are of course not liable for the battery quality, since we are not producing them.
The efficiency of E-LYT has been scientifically certified by state expert opinions and TÜV (German Technical Control Board).
E-LYT is produced in Germany under German quality assurance and is sold all over the world.
We are herewith express stating, that E-LYT contains only substances which will under no circumstance have an adverse effect on lead sulfuric acid batteries at no time of their service life, whatever may be thinkable.
This applies worldwide for all lead sulfuric acid batteries (traction, stationary, starter batteries).
Así es como se utiliza E-LYT:
La cantidad calculada de E-LYTse añade al ácido de la batería de las celdas individuales en porciones iguales.
E-LYT se llena sólo una vez durante la vida útil de una batería.
E-LYT puede ser utilizado exclusivamente con las baterías de plomo ácido sulfúrico.
El cálculo de la cantidad requerida de E-LYT se basa en la fórmula:
Volt x Ah x 0,1667= x ml
Para su promulgación rápida que son bienvenidos a utilizar nuestra calculadora.
In order to prevent false interpretations:
E-LYT is no dope (pH-value = 3.5), but an additive activating the chemical process in the battery.
By E-LYT a long-term regeneration effect will be achieved.
We are unable to perform miracles and return the developed bottom sludge back to the pole plates.
However, the features of E-LYT allow slowing down the development process of bottom sludge.